Product Summary
Outline specifications See details
Accuracy | Low to mid |
Measurement range | 10 - 19,990,000 (pcs/cc) |
Detectable ion | Positive/Negative small air ions (measures simultaneously) |
Measurement method | Parallel flat plates method |
Runs on | Dry battery or AC |
Weight | approx. 770g |
PC connectable | No |
Applications | High-performance ion generators, Ion dryer etc. *Not good for low density ions. |
The NKMH-103 is not good for low density ions.
The NT-C101A is available to measure ions in the range of 0-10,000 (pcs/cc).
|
Usable worldwide!
You can use this ion counter in most countries as it works with AC100-240V and comes with the AC plug adaptors for the countries.
|
Demonstration Video
Play time: 0:34/No sound with subtitles
Related products
No.1560 Mr. D.D, New Jersey, United States
Verified user
|
Reviewed on 2012-09-28 |
|
|
5 / 5-stars |
I am very pleased with the operation of the unit it is an excellent product!
The equipment arrived ahead of schedule, which was very helpful in completing a project. The setup and operating instructions were clear and easy to follow. I am very pleased with the operation of the unit it is an excellent product. Read more
No.1964 Ms. M, Osaka, Japan
Verified user
|
Reviewed on 2014-01-24 |
|
|
5 / 5-stars |
It is very easy to operate. This small and lightweight device is good for outdoor use.
It is very easy to operate. This small and lightweight device is good for outdoor use. You offered great service. Thank you for recommending this product which meets my requirements when I contacted you. Read more
No.2313 U, Osaka, Japan
Verified user
|
Reviewed on 2015-04-21 |
|
|
5 / 5-stars |
I decided to order this product as you offered great customer support when I called you.
I called you to check if you had the Ion Counter NKMH-103 (Bi-polar/Ultra wide range) in stock before I purchased it. I ordered it on the phone as you offered great customer support. The package arrived earlier than I had expected. I had a good shopping experience. I will be back again. Read more
No.2531 Mr. K.S, Tokyo, Japan
Verified user
|
Reviewed on 2016-08-26 |
|
|
5 / 5-stars |
I can use it to develop new products.
Reason(s) why I purchased from you: I compared prices with others.
I am happy because: I can use it to develop new products which emit negative ions. I have not got used to using this product yet. I hope I will be able to make use of it. Read more
No.2590 Mahya Field .inc, Tokyo, Japan
Verified user
|
Reviewed on 2016-12-13 |
|
|
5 / 5-stars |
It shows how the air quality changes depending on ambient conditions as both positive and negative ion counts are displayed.
I am amazed as exact ion counts are displayed in every living environment. I am glad to confirm that the air in a forest is as clean as the air in a room painted with paint containing antioxidative substances. It shows how the air quality changes depending on ambient conditions as both positive and negative ion counts are displayed. Read more
[Please note]
Customer Reviews on this page are just for your reference and they do not guarantee the efficacy/performance of the product.
Please consult a doctor if you need medical treatment. Customer Reviews written in Japanese are translated into English by Ion Trading.
Contents - Air Ion Counter Tester NKMH-103 (Bi-polar/Ultra wide range)
How to Use
No complicated setting is required. You just turn on the ion counter, select the measurement range and place the measuerment sample close to the air intake part.
It takes only 30 seconds to start to measure ions. The image below shows 1800/800 (pcs/cc) of negative/positive ions are detected.
Measurement range: You can manually select the measurement range from 199,900/1,999,900/19,990,000 (pcs/cc). For more details, please see the instruction manual.
Zero adjustment: No zero adjustment is required. The counter is automatically calibrated.
Measures Positive/Negative Ions Simultaneously, Wide Range, Good for R/D & Product Promotion
✔ Measures Positive/Negative Ions Simultaneously
The NKMH-103 is an affordable ion counter yet measures positive/negative ions simultaneously.
Unlike other ion counters in this price range, you do not need to switch to the positive <-> negative ion measurement mode.
This model simultaneously measures both ions and displays the ion counts on the LCD display.
✔ Measures up to 19,990,000 (pcs/cc), Ultra Wide Range
The NKMH-103 measures 100-19,990,000 (pcs/cc). There are very few ion counters which can measure over 10,000,000 (pcs/cc).
This ion counter is good for measurement of 2,000-300,000 (pcs/cc) ions emitted from negative ion products up to over 10,000,000 (pcs/cc) ions generated by high-performance ion generators.
The NKMH-103 is not good for low density ions.
The NT-C101A is available to measure ions in the range of 0-10,000 (pcs/cc).
|
✔ Good for R/D & Product Promotion
It is good for R/D & product promotion as it clearly shows the ion count.
Lightweight and Compact Body, Runs on a Battery or AC
✔ Lightweight and Compact Body
This product weighs 770g (including the battery), so it is easy to carry around. Ion tester good for outdoor use!
✔ Runs on a Battery or AC
This ion counter runs on x 006P dry battery or 100-240VAC/50-60Hz via the AC adapter. You can use it in most countries.
DC Analog Output
You can use the cable, which is included in the package, to connect a DC voltage meter or digital multimeter to the ion counter.
DC voltage, which is in proportion to the ion count
*1 *2, is extracted from the counter.
This allows you to remotely monitor the ion count.
You do not need to stay close to the counter during the measurement!
*1 1mV/1digit
*2 +/-1V is outputted when the reading is +/-1000.
For more details:
Q & A How can I use the DC analog output jack?
Photos of Actual Measurements
* The readings shown on the LCD display are not exact measurement results.
High density negative ion generator
|
Negative ion dryer
|
Mobile negative ion generator
|
Mobile negative ion generator
|
Package Contents
- Air ion counter
- Ion generator for test operation
- Specially designed 100-240VAC compatible AC adaptor
- Grounding cable
- Cable to transfer DC analog output signals
- Instruction manual
- Aluminum carrying case (*)
- Warranty card
- Certificate of inspection
|
(*) The aluminum carrying case may differ from the image
Part Names & View of the NKMH-103
Q & A
Q & A: Ion counter
|
(1) How long do I have to wait after I turn on the counter?
You have to wait 30 seconds. No complicated setting or calibration is required before measurement.
(2) Do I have to perform zero adjustment before measurement?
No, you do not. The counter is automatically calibrated.
(3) What is the ideal distance between the detector and the sample?
There is not an ideal distance.
However, the ion count detected by the counter can be lower than it actually is
when the sample is too far away from the counter. 10mm +/- will be fine.
Please be sure that the sample never makes contact with the detector.
(4) Can I select a measurement range for positive ions and another range for negative ions?
You cannot select different measurement ranges for positive and negative ions. They are simultaneously measured within the same range.
(5) Do I have to wait 30 seconds after I change the measurement range?
We suggest you should do so because it provides more accurate measurement.
(6) Can I store the ion data in the counter?
No, you cannot.
(7) Can I measure ion densities in water?
No, you can't. This ion counter is for air ions.
(8) What is the lowest ion density this counter can measure?
It is 100 (pcs/cc).
(9) Do I need to adjust or calibrate the detector?
No, you do not need to.
(10) Does this counter require grounding?
We suggest you should ground it because it provides more accurate measurement.
(11) I cannot find a measurement tolerance in the specs. Why?
This is because there is no official standard to measure air ions and the tolerance.
Measurement tolerances can be found in specs of products supplied by other companies
but they can be theoretically calculated values.
We inspect every counter prior shipping and compare the actual measurement with that of a precisely calibrated ion counter to make sure that the tolerance is within 10%.
(12) Do you have a users manual written in other languages?
We only have English and Japanese versions.
(13) Can I transfer the DC output signals to my PC?
No, you cannot. It can cause failure of both the PC/counter. You can use the cable to connect a DC voltage meter or digital mulitmeter to the counter.
|
Q & A: Maintenance work
|
(1) Does the ion counter require calibration? If it does, how often does it need to be calibrated?
It depends on your usage and ambient conditions but we suggest it should be calibrated once a year.
We can calibrate your counter. You can feel free to contact us.
(2) How much/long will it cost/take for calibration work?
It will cost 225USD+/- depending on the exchange rate and will take a week or two.
We will contact you to give you a quote if the counter needs calibration work.
(3) Can I clean up the detector by myself? If I can, how can I do that?
Yes, you can.
- Remove dust from the exhaust fan on the right side panel and inside the detector.
- Open the air intake panel cover and use an air compressor if there is a lot of dust inside.
Please note: The detector can wear out prematurely if you clean up too often. Do not rev up the fan too much when you use an air compressor.
If the counter still seems to be working improperly after cleaning up the detector, please contact us.
|
Q & A: Others
|
(1) Does this counter come with a warranty?
We offer 2 years warranty.
(2) Can I return the counter?
We accept returns within 8 days of delivery.
(3) Do you offer a rental service?
No, we do not.
|
Specifications
P/N: NKMH-103
|
Product name
|
Air Ion Counter Tester NKMH-103 (Bi-polar/Ultra wide range) |
Detectable ion
|
Positive/Negative small air ions
|
Measurement method
|
Parallel flat plates method
|
Mobility
|
1.0 (cm2/Vs)
|
Air flow rate
|
1000 (cm3/s)
|
Dimensions
|
W180xH40xD95 (mm) (projections not included)
|
Weight
|
Approx. 770g (battery included)
|
Internal power supply
|
1x 006P 9V dry battery * (runs approx. 3 hours continuously)
*alkali recommended
|
External power supply
|
AC adaptor 100-240VAC (50/60Hz)
|
Display
|
3.5 digit LCD
|
Measurement range
|
100-19,990,000 (pcs/cc).
102 range: 100-199,900(pcs/cc)
103 range: 1,000-1,999,000(pcs/cc)
104 range: 10,000-19,990,000(pcs/cc)
|
Minimum detectable ion density
|
100 (pcs/cc)
|
DC analog output
|
±1999mV (1mV/1digit)
|
Operating temperature range
|
-10C - 40C (14F - 104F)
|
Operating humidity range
|
70% R.H. or below (no condensation)
|
Storage temperature range
|
-20C - 70C (-4F - 158F)
|
Storage humidity range
|
70% R.H. or below (no condensation)
|
Interface
|
DC analog output
|
Manufactured by
|
Hokuto Electronics,inc.
|
Made in
|
Japan
|
Ion counter related informaiton
|
US$1607.00
|
US$996.44
|
US$1212.08
|
|
US$996.44
|
US$1406.99
|
US$1700.00
|